Universal Mount 2 HP 1500 Watt Computer Controlled Servo Motor. With USA version 2.50 OD double belt sheave Pulley. The 2022 models are here. Their old time lathes and milling machines from inferior induction motors to modern design servo motors.
This allows for easy adaption to fit many old. Lathes and drill press's Note: Custom bolt hole patterns are available. Use ask now and include a draft with accurate.2AK25 Double Groove AK Fixed Bore Pulley. This fits the most common USA size belts found from the 1950's until. Use with A, 3L & 4L (A & AX) V-Belts! For any range between 300 to 3,500 RPM. Note: the maximum distance between control unit and motor is 28 inches. Runs on typical 110 to 120 volt AC. A complete servo motor as seen in images. Custom built 2022 servo motor driver with built in overload protection and internal variable speed control. A flush and universal fit motor mount. A USA size 2.50 double sheave pulley that fits the old standard USA belts usually called. A, 3L & 4L (A & AX) V-Belts. The one actually in the photos Whats in the box. One 1,500 watt (2 HP) servo motor. One customized 2022 servo motor. Controller with internal speed control. And a thermal overload system. 2.50 Double Groove AK Pulley. One Custom Crafter 15mm to 5/8 bushing adapter. Used to fit US version pulley and already. Motor programming + spindle speeds and Reverse. The motor speed can be programmed to operate in any range chosen by the user. Between 300 and 3,500 RPM's. The full range of speed (RPM's) can also be controlled with just the speed control knob. Only requires a few easy steps. Reverse is simple, just hold the yellow button for a few seconds. Includes the ability to set bottom and top RPM range separately. In other words you can program the system to run the spindle at any speed or range of speeds you choose (see below). Slowest speed achievable: Motor 200 RPM. (Below 300 is not recommended). Highest speed: 3,500 RPM.
Can be programmed to reach 5,000 RPM. This is seriously not recommended. It is also dangerous as in parts could fly across the room causing serious bodily injury even death.Setting above 3,500 RPM also voids. Soft start is programmable and will be set as soft as possible when you receive this motor. This program is very effective in reducing drive belt wear etc. Braking strength is also programmable and will be set as low as possible. Safe turn on system where the speed control knob must be in the full counter clockwise (stop) position when turned on. When turned on the self. System checks for faults and will not allow the motor to turn on until the speed control knob is turned all the way to stop first. Control unit has the ability to stop the motor or what ever it is turning in 2 different locations with external hall effect sensors not included. To communicate with any CNC. Use at your own risk.
RPM: 100 to 3,500 RPM in 100 RPM increments. This listing is for what is seen in the primary image.It will include printed programming instructions. Have this on my Taig lathe with 5c head stock and wow!!
Can't find this anywhere else. Its running great on my 1942/52 first generation ShopSmith.
Large flat rate box and to USA only. This item will be is strict. Applied to this item when it was listed. See details, what's covered and for how long etc below. If found to be abuse or missing the.
Or demos that I have from previous builds. Additionally original packaging such as Styrofoam package inserts must be used to return these parts.Ask lots of questions before ordering. Do not worry about missing this item. If you miss it, I will get more soon. This item is in the category "Home & Garden\Tools & Workshop Equipment\Power Tools\Lathes". The seller is "thecustomcrafter" and is located in this country: US.
This item can be shipped to United States.