Industrial Electric Motor

7.5hp Baldor Compressor Duty Industrial Electric Motor, 215t, 1740 Rpm, 208-230v


7.5hp Baldor Compressor Duty Industrial Electric Motor, 215t, 1740 Rpm, 208-230v
7.5hp Baldor Compressor Duty Industrial Electric Motor, 215t, 1740 Rpm, 208-230v
7.5hp Baldor Compressor Duty Industrial Electric Motor, 215t, 1740 Rpm, 208-230v
7.5hp Baldor Compressor Duty Industrial Electric Motor, 215t, 1740 Rpm, 208-230v
7.5hp Baldor Compressor Duty Industrial Electric Motor, 215t, 1740 Rpm, 208-230v
7.5hp Baldor Compressor Duty Industrial Electric Motor, 215t, 1740 Rpm, 208-230v
7.5hp Baldor Compressor Duty Industrial Electric Motor, 215t, 1740 Rpm, 208-230v
7.5hp Baldor Compressor Duty Industrial Electric Motor, 215t, 1740 Rpm, 208-230v

7.5hp Baldor Compressor Duty Industrial Electric Motor, 215t, 1740 Rpm, 208-230v   7.5hp Baldor Compressor Duty Industrial Electric Motor, 215t, 1740 Rpm, 208-230v
THIS MOTOR IS RATED AT 7.5HP, CAN BE CONNECTED TO 208- 230V INCOMING POWER SUPPLY. THIS MOTOR COMES ON A 215T STEEL FRAME WITH AN 1-3/8 SHAFT DIAMETER AND ROTATES AT 1740 RPM.

THIS MOTOR IS REVERSIBLE AND CAN BE WIRED TO ROTATE EITHER CW OR CCW. THIS IS AN OPEN DRIP PROOF MOTOR AND IS INTENDED TO BE USED IN DRY, NON-DUSTY INDOOR ENVIRONMENTS.

BALDOR COMPRESSOR DUTY MOTORS ARE SPECIFICALLY DESIGNED TO MEET START UP AND TORQUE REQUIREMENTS FOR INDUSTRIAL GRADE AIR COMPRESSOR PUMPS. BALDOR MOTORS ARE RATED HEAVY DUTY, FULL INDUSTRIAL AND DESIGNED TO LAST. THIS MOTOR IS MADE IN THE USA. THIS MOTOR SHIPS BY TRUCK. PLEASE MAKE SURE THE ELECTRIC MOTOR YOU ARE REPLACING MATCHES THE SPECS SHOW N BELOW BASED ON YOUR EXISTING MOTORS DATA PLATE.

7.5HP - 213T OR 215T FRAME - 1750 RPM - 208-230 VOLT - 1-3/8" SHAFT DIAMETER - 3.5" SHAFT LENGTH - 1.25 SERVICE FACTOR - ODP (OPEN DRIP PROOF) ENCLOSURE. THIS BALDOR SPEC MOTOR IS A DIRECT REPLACEMENT OF THE L1510T AND LEESON 140155. VOLTAGE: 208-230V THIS MOTOR IS NOT DESIGNED TO HANDLE INCOMING VOLTAGE LESS THAN 208V. FRAME: 215T WILL ALSO DIRECTLY BOLT UP AND REPLACE 213T FRAME SIZES.

SHAFT DIAMETER: 1-3/8 KEYED SHAFT. ROTATION: REVERSIBLE CW OR CCW ROTATION. ENCLOSURE: ODP OPEN DRIP PROOF. We would be more than happy to correct any issue.

Regardless if we accidentally sent you the wrong item (which seldom happens) or the customer ordered the wrong part by mistake. WE WILL correct any potential problem. Liability: UPE_Group is a dstributor and as such, has no direct or indirect control over the materials, processes, or quality control procedures used by the manufacturers of the products we resell. Accordingly, UPE_Group will NOT be held responsible for damages resulting from product defects, or, from mis-applications/improper installations by the customer or end user. It is the purchasers responsibility to determine the suitability of the product for the specific application.

If it is deemed defective, UPE_Group shall be held harmless of any and all damages including (but not limited to) physical injury, property damage, water damage or otherwise for any reason. It is the purchasers responsiblity to determine the suitability of these products for your specific application. Including, but not limited to, using alternative products.

UPE_Group shall be held harmless of any and all damages including but not limited to physical, property, water or otherwise for any reason. Your use of any information or materials on this listing is entirely at your own risk, for which we shall not be liable. By submitting your order, the purchaser acknoledges agreement with the Terms & Conditions as outlined here and our website.

The item "7.5HP BALDOR COMPRESSOR DUTY INDUSTRIAL ELECTRIC MOTOR, 215T, 1740 RPM, 208-230V" is in sale since Wednesday, December 18, 2019. This item is in the category "Business & Industrial\Industrial Automation & Motion Controls\Electric Motors\General Purpose Motors". The seller is "upe_group" and is located in Dallas, Georgia.

This item can be shipped to United States.

  1. Enclosure Type: ODP (Open Drip-Proof)
  2. Model: 7.5HP-215T-1PH-Baldor
  3. Country/Region of Manufacture: United States
  4. Full Load Amps: 34A @ 208V / 28.6A @ 230V
  5. NEMA Frame Suffix: 215T
  6. Current Type: AC
  7. AC Frequency Rating: 60 Hz
  8. California Prop 65 Warning: This Product contains chemicals like Cobalt, known to the State of California to cause Cancer, and birth defects or other reproductive harm.

  9. Actual Rated Input Voltage: 208-230V
  10. AC Phase: Single Phase
  11. Insulation Class: F (Max 311°F)
  12. MPN: BALDOR SPEC 7-215-1
  13. Mounting Type: Foot-Mounted
  14. Shaft Diameter: 1 3/8 in
  15. Type: Electric Motor
  16. DIRECT REPLACEMENT OF: L1510T 140155.00
  17. Rated Load (HP): 7.5
  18. Special Motor Construction: COMPRESSOR DUTY
  19. Brand: Baldor
  20. Reversible/Non-Reversible: Reversible
  21. Service Factor: 1.25
  22. Shaft Type: Keyed
  23. Base RPM: 1750


7.5hp Baldor Compressor Duty Industrial Electric Motor, 215t, 1740 Rpm, 208-230v   7.5hp Baldor Compressor Duty Industrial Electric Motor, 215t, 1740 Rpm, 208-230v